Coolant Ring for Tormach

WORKS ON NEWER TORMACH ® ATC , older ATC need to have their metal covering modifed.
440 will need ATC sheet metal cut back .75" on both sides for all versions of its ATC
 
Newest Version Updates:
- 6 Nozzles
-Nozzles able to move up to 35 degrees
- 3/8 NPT Inlet (vs 1/4 NPT version before)
-Higher Flow Ring
- Lighter (13% lighter)
- 4x 8-32 screws to hold sealed covered plate (3x 6-32 version before) 
 
Made from 6061
Works with 770mx , 770m/m+ , 770 series 3, 1100mx, 1100m/m+, 1100 Series 3
440  without ATC
 
Come with:
- 1/2 OD Push to Connect Fitting (Standard)
- M6 Mounting Screw
- Washer
- Dowel Pin For Nozzle Adjustment
Video #1 is 1/8 hp pump with 5/8 ID Tube
Video #2 is 1/4 hp pump with a 1/2 ID Tube
Video #3 is 1/4 hp pump with 3/8 (1/2 OD)IN Tube
 
Recommended Pump: 
1/8 hp: https://amzn.to/3vMKYmp
1/4 hp: https://amzn.to/33CygfT
 
We now offer chip screen for the under side of the chip tray, we have found this is the best way to keep the coolant rings clean of chips and have the highest flow rate while achieveing a 50 micron filtation.